10 Sep Maintenance Tips for Graco Cordless Cart Sprayer ProXChange Pump Parts
Essential to keeping your Graco Cordless Cart Sprayer with ProXChange Pump Parts performing at its best is to follow a regular maintenance schedule. A key feature of the ProXChange Pump system is that users can change out a pump in minutes without tools. Although it is important to maintain the sprayer regularly, you also need to make sure that your pump and other components of the tool are functioning properly.
Expert Tips on Maintaining your Graco Cordless Cart Sprayer ProXChange Pump parts
1. Regular Cleaning After Use
The duty you have to carry out with the greatest diligence in maintenance is cleaning your sprayer after each use. This will avoid setting paint, stains, or coatings in the system which would create a clog and could damage your ProXChange pump. Unfortunately, the answer is: by cleansing it thoroughly.
- Fill Pump Armor: Load Graco cleaning solution or recommended fluid (water for water-based paint and mineral spirits for oil-based) 1/3 into a bucket.
- Disassemble Core Parts: Another key to a solid cleaning is removing the spray tip, guard, and filters separately. Soaking these components in the solution will eventually break down any buildup.
2. Regular Pump Inspections and ProtXChange Replacement
The Graco ProX19 Cordless Cart Sprayer ProXChange Pump Parts are designed to be quickly and easily swapped out, but you should still give it the once-over every now & then to see if you notice anything that looks worn. Graco Suggests Pump Replacement After A Certain Number Of Gallons Sprayed (depending on the model) Indications that Require you to Replace your Pump
- Pressure or Performance Loss: Should you lose pressure when using your sprayer, it is starting to take longer for the spray pump to reach this state each time.
- Too much noise or A Leak: This is the condition of this part means, If you hear a strange sound coming out from the pump something could have gone wrong internally in it if there seem to be visible leaks around.
The ProXChange allows you to easily swap out the pump if any of these symptoms are detected. Making sure that you have a spare pump around will allow your projects to keep running.
3. Lubricate Key Components
To lower friction and wear over time, they should appropriately lube the pump’s relocating components. Graco makes a pump armor or lubricant that is supposed to be for their equipment. The following parts should be oiled with the recommended lubricant after each cleaning
- The piston rod — The movement of the rod is another component that must be in working order to maintain pressure.
- Seals of the Pump: The seals in your pump can dry out with time and get a hairline crack very soon.
By lubricating it often you not only extend the life of your pump but can keep it running at peak performance every time.
4. Inspect and Maintain the Filters
Your sprayer’s filter is the real meat and potatoes when it comes to a system that won’t clog up on you. If not, the nozzles can become clogged with dried paint in time and prevent it from working properly. Here are some common steps you can take to help keep your filter system in working order:
- Inspect Filters Often: Before every use, it is important to ensure that the inlet and manifold filters are not obstructed. Rinse the affected cartridges with a cleaning solution.
- Change Filters if Broken: After extended use, filters can wear down or be broken. Replace them if they seem either torn or too dirty even after you clean them.
- Correct Filters Used: Verify that the filters are large enough and applicable to your material. When narrowing down or broadening a filter it can either slow the flow way too much or let dirt go over.
5. Maintain the Spray Tip
Graco Magnum LTS 15 Model 257060 (Series A) Airless Sprayer Parts are another important component that needs to be maintained. With use, the spray tip will wear and lead to an irregular pattern or over-spray. keep your spray tip in good shape by following these tips
- Consistently Clean Your Tip: Never let material sit in the tip after use as this will cause it to harden over and block your opening.
- Check the Other End: Graco spray tips are reversible, so you can quickly turn them over if clogged. But if the point starts getting dull, it’s time for a new one.
- Take Advice: Use a tip with the proper size for your spray project, this promotes accuracy in finish quality and prolongs longevity of sprayers. Follow Graco’s instructions to decide which nozzle size is correct for the stuff you are spraying.
Conclusion
The Graco Cordless Cart Sprayer is one of the most popular sprayers in this class, but its ProXChange Pump has certain maintenance standards that need to be strictly adhered to if you want your equipment to consistently perform at a high level for years. Maintain- Cleaning the sprayer regularly, inspecting and replacing parts when needed, and storing a pump for winter storage will help prevent costly repair downtime. Follow these tips, as we share pro advice for ensuring your Graco sprayer runs its best on all of those painting projects.
Sin comentarios